Rheem RGFE Installation Instructions Manual page 131

FIGURE 114
SELECT THE SETUP ITEM TO BE ADJUSTED (MAX HEAT ADJ%).
FIGURE 115
SELECT THE DESIRED VALUE (7).
FIGURE 116
UPDATING THE SUBSYSTEM.
Home
Enter
Home
Enter
5. Use the up and
down arrow keys to
view and navigate to
the desired setup
menu item. Once
the desired menu
item is highlighted,
press the " M " key to
enter the sub menu.
In this example, we
will change the MAX
HEAT Adj% (cur-
rently set to 0%)
6. Use the up and
down arrow keys to
view and navigate
to the desired setup
selection. Once the
desired menu item
is highlighted, press
the " M " key to
change the selec-
tion. In this exam-
ple, we will change
the MAX HEAT
Adj% (currently set
to 0%) to + 7 %
7. This screen;
Updating the
Subsystem will be
displayed briefly
while the system
updates the setting.
131