Samsung SCX-5315F Service Manual page 29

3-14 Main Frame Ass'y
1. Before you remove the LSU, you should remove:
- Rear Cover (see page 3-1)
- Scanner Ass'y (see page 3-2)
- Side Cover Ass'y (see page 3-9)
- Fuser (see page 3-11)
- Exit Ass'y (see page 3-12)
- Cover Paper Exit Ass'y(see page 3-12)
- SMPS (see page 3-14)
- LSU (see page 3-15)
2. Remove the OPC Ground Screw (see diagram).
Take care when re-assembling as if the thread is
stripped the OPC ground may become intermit-
tent causing print faults. Then remove the rest of
the five screws to dissassemble the Dummy
Base Frame, the Cover Front and the Exit Roller
release cam.
OPC Ground Screw
Front Cover
3. Remove the Deve Lock Lever, and then remove
the one screw and the Cover Motor Bracket.
Lock Deve
Samsung Electronics
Dummy Base Frame
Cam Jam Remove
Cover Motor Bracket
4. Unplug the all connectors.
5. Remove the seven screws and take out the
Main Frame Ass'y.
Disassembly and Reassembly
Main Frame Ass'y
3-19