Kärcher G 4000 RH Operator's Manual page 6

STEP 5:
"
Fasten the rubber grommets in the
nozzle holder.
STEP 6:
"
Place the quick connect nozzles in
the nozzle holder.
STEP 7:
"
Attach the wand to the spray gun.
STEP 8:
"
Pull the spring-loaded collar of the
wand back to insert your choice of
quick connect nozzle.
6
English
STEP 9:
"
Release the collar and push the noz-
zle until the collar clicks.
WARNING
High pressure in nozzle area.
Risk of injury caused by improperly
locked nozzle.
Make sure you hear a 'click' when in-
!
serting the nozzle tip into the wand.
Pull the nozzle to make sure it is
!
seated properly before operating
your unit.
STEP 10:
"
Attach the high pressure hose to the
spray gun.