Kärcher G 2200 Owner's Manual
  1. Manuals
  2. Brands
  3. Kärcher Manuals
  4. Pressure Washer
  5. G 2200
  6. Owner's manual

Kärcher G 2200 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

G 2200
English. . . . . 4
Español . . . . 20
Français. . . . 40
8.641-220.0
12/15

Advertisement

Table of Contents
loading

Related Manuals for Kärcher G 2200

Summary of Contents for Kärcher G 2200

  • Page 1 G 2200 English..4 Español ..20 Français..40 8.641-220.0 12/15...
  • Page 2 G 2200...

  • Page 4: Table Of Contents

    Contents 13. Hand Cord 14. Oil Dipstick 15. Pump Inlet Model Overview EN-4 Specifications Safety Instructions EN-5 Assembly Instructions EN-7 G 2200 Preparation EN-9 Operating Pressure 2200 PSI Operating Instruction EN-10 Water Volume 2.0 GPM Using the Accessories EN-11 Engine...

  • Page 5: Safety Instructions

    ▬ Do not operate when fatigued or under the influence of alcohol or Hazard Levels drugs. ▬ Keep operating area clear of all persons. Indicates “an imminently hazardous ▬ Do not overreach or stand on situation which, if not avoided, will unstable support.
  • Page 6 ▬ The trigger gun safety lock prevents different location and avoid creating the trigger from accidentally being sparks. engaged. This safety feature must be ▬ This machine has hot surfaces which engaged when replacing nozzles or can cause burns. Operate in a safe not in use.

  • Page 7: Assembly Instructions

    ▬ Always prevent debris from being drawn into the unit by using a clean water source. Use additional water filter. ▬ Do not operate pressure washer without the water turned on. C - Gun Hook & Hose Hook Assembly Instructions Part List D - Knobs &...
  • Page 8 ► Attach the handle and main frame Parts not shown: with knobs and bolts. 1 - Manual 1 - Nozzle Cleaner 1 - Spark Plug Wrench 1 - O-Ring Set (2 for pressure hose, 1 for spray gun) Assembling ► Install the wheels to the main frame by pressing the spring loaded pin on wheel axle, then insert wheel axle into frame.

  • Page 9: Preparation

    dipstick or until it reaches the bottom lip of the dipstick hole as shown. Preparation Oil Level Engine shipped without oil in crankcase. Before starting engine, fill with oil. Do not over-fill. Do not run the Always use SAE 10W-30 oil. engine with a high or low oil level as Oil crankcase capacity: 0.55L.

  • Page 10: Operating Instruction

    then remove the fuel cap by turning it ► Replace filter and replace the air filter counter clockwise. cover. ► When refueling, make sure the fuel filter is in place and keep in mind all Operating Instructions safety precautions. ► Use clean unleaded gasoline with a Starting Procedure: minimum of 87 octane.

  • Page 11: Using The Accessories

    ► Open water source. Cleaning Procedure: ► Position the tip of the wand 6-8” (15-20 cm) away from the surface to clean at a 45°angle. ► Start the Engine Using the Accessories Quick Connect Nozzles The color-coded quick connect nozzles provide a wide array of spray widths from 0°...

  • Page 12: Working With Detergents

    25° spray angle = Green nozzle For dirt accumulation over a large surface. 40° spray angle = White nozzle For moderate dirt accumulation over a large surface. Soap = Black nozzle For operating with detergents or cleaning with low pressure. ►...

  • Page 13: Taking A Break

    washer. The special formula won't clog the filter and will protect the Shutting Down internal parts of the pressure washer & Clean Up for a longer life. For Kärcher Detergents, check your retailer or visit ► If detergents have been used, insert our website: 1 gallon of fresh water into Detergent Bottle.

  • Page 14: Winterizing & Long Term

    ► Screw bottle into water inlet on (You can locate a service center in pressure washer pump and squeeze. your area online at: ► With ignition OFF, pull starter rope www.karcher-service.com). until fluid starts to exit. ► Unscrew bottle. Store or dispose Engine properly.

  • Page 15: Cleaning Tips

    from the cleaning surface (distance should increase when rinsing Cleaning Tips pin-striping or other sensitive surfaces). Always clean from top to bottom and from left to right. For best Deck Cleaning results, wipe surface dry with a chamois or soft dry cloth. With or Without Detergent Pre-rinse deck and surrounding area with fresh water.

  • Page 16: Optional Accessories

    remain on surface 1-3 minutes. Do not stubborn dirt. Rinse at high pressure allow detergent to dry on surface. in a sweeping motion keeping the spray nozzle approximately 3-6 inches Rinse at high pressure in a sweeping motion keeping the spray nozzle from the cleaning surface.

  • Page 17: Troubleshooting

    Troubleshooting Remove the spark plug cable to pre- vent accidental ignition of the engine before making any repair. Symptom Cause Solution Engine Will Not No Gasoline. Fill Gas Tank. Start Choke is not in the Slide lever out to closed position. correct position.
  • Page 18 Symptom Cause Solution Output Pump is sucking air. Check that hoses and fittings are air Pressure tight. Turn off machine and purge pump Varies Between by squeezing trigger gun until a steady High And Low flow of water emerges through the nozzle Water inlet filter is Remove filter and rinse out in warm...

  • Page 19: Engine Ohv

    Spray wand not Turn the swivel nut of the gun clockwise Leaks properly attached. until connection is tight. Broken o-ring or Visit www.karcher-help.com or locate a plastic insert. service center at www.karcher-service.com. Pump Is Noisy Not enough gas or Check that hoses and fittings are air engine oil.

Table of Contents