Control Center Menu Bar Features; File; Communications; Tools - Ioline FlexJet User Manual

Control Center Menu Bar Features

File

Download Firmware
Send Plot File
Exit

Communications

Settings
Send Command
Automatic Buffer
Closing

Tools

Aux Sensor
Cartridge Calibration
Size Calibration
About Your FlexJet
FlexJet Licensing

Help

About
Allows the user to download the lat-
est firmware version for the FlexJet.
See the section Downloading Firm-
ware in the Routine Maintenance
chapter for more information.
Print a PLT or PLX file.
Exit the Control Center.
Select the COM port and baud rate
to match the printer.
Permits advanced users to manually
enter commands.
Disables Buffer Close Timer. Improves
communications on some systems.
Controls the bottom Paper Out
sensor on new FlexJets or the Cover
Sensor on old FlexJets.
Displays tools to adjust print
cartridge alignment. See Routine
Maintenance for more details.
Allows adjustment of the size cali-
bration settings. See Routine Main-
tenance for more details.
Displays license information for ma-
chines with upgraded print heads.
Sets the license key code to enable
inactive print heads in machines
pre-wired for expansion. Requires
firmware version 368.x or greater.
Displays Control Center version
information.
25
Chapter 3: Operation