Logging Onto The System; Clerk Logon; Training Clerk Logon; Manager Logons - Olivetti ECR 8200 S User Manual

L O
OGGING NTO THE
The programming manager should keep a track of all
passwords set up on the system so as to be able to
provide users with them when they need to access the
system. For the clerk login to be necessary, the Clerk
System must be active (see "Clerk System").
C L
LERK OGON
If the Clerk System is set up, all Clerks must log onto the
cash register using their clerk number and optional
password before they can enter sales transactions.
1. Press to activate the Main menu.
2. Select Registration mode .
3. A prompt appears: Type the clerk number . Using the
numeric keypad, enter your clerk number from 1 to
15 and press .
4. If a password has been set up for this Clerk number,
another prompt appears asking you to enter it:
the clerk password . Enter the corresponding three-
digit code and press
NOTE: If you do not know the password ask your
Manager.
The message Start Registration appears. You can now
enter sales transactions using the keypad.
T C L
RAINING LERK OGON
The procedure is the same as for the ordinary clerk
logon (described above). The only difference is that at
step 3 you must specify the number of a Clerk that has
been set up as a Training Clerk. Once logged on, you
can perform all sales transactions but in training mode
only.
The Training mode symbol
to indicate that Training mode is active.
To exit from Registration mode and return to the Main
menu, press .
32
S
YSTEM
Type
.
appears at bottom left
M L
ANAGER OGONS
1. Press to activate the Main menu.
2. Select the mode you want to log onto from:
•
Manager mode
•
Programming mode
•
X1 & 2 Report mode
•
Z1 & 2 Report mode
3. If a password has been set up for the chosen mode,
a prompt requests you to enter it:
Manager password .
Enter the corresponding four-digit code and press
.
The Manager mode symbol
left to indicate that Manager mode is active.
L O
OGGING FF
To log off and return to the Main menu, press
To switch off the display, select
menu.
If any sales transactions are in course, before pressing
, first terminate the transaction, otherwise an
error is signaled. Press
Enter the
appears at bottom
Off mode from the Main
to stop the error key tone.
.