Picture Settings - Bosch VIP X1 Installation And User Manual

EN | 53
VIP X1/VIP X2 | Installation and User Guide
Displayed alarm message:
Enter the message to be displayed for an alarm. It can contain up to
31 characters.
Video watermarking:
Choose On if the video images transmitted are to be "watermarked". After
activation, all images will be marked with a small green rectangle. A red
rectangle indicates that the sequence (live or saved) has been manipulated.

Picture settings

You can set the video image of each camera to suit your requirements. The
current video image is displayed in the small window next to the sliders as
confirmation. The changes take effect immediately.
– First click on a tab to select the corresponding camera (VIP X2 only).
– Set the slide bar to the desired position.
– Click Default to reset all settings to their default values.
Contrast (0...255):
You can use this function to adapt the contrast of the video image to your
working environment.
Saturation (0...255):
You can use this function to adjust the color saturation, in order to make the
reproduction of colors on your monitor as realistic as possible.
Bosch Security Systems | 2005-05 | V1.0 Configuration using a Web Browser