Time Settings - Bosch VIP X1 Installation And User Manual

EN | 51
VIP X1/VIP X2 | Installation and User Guide
Time server
The VIP X can receive the time signal from a time server using the time server
protocol (RFC 868) and then use it to set the internal clock. The device calls up
the time signal automatically every ten minutes.
Time zone:
Select the time zone in which the system is located.

Time settings:

Select this during daylight savings time if the time change is to be taken into
account. Deactivate the check box to switch to winter time.
Time server IP address:
Enter the IP address of a time server working with the RFC 868 protocol.
Camera names
The camera name makes it easier to identify the remote camera location, in the
event of an alarm for example. It will be displayed in the video screen if
configured to do so (see page 52). Moreover, the camera name is used by
VIDOS, the software for managing video surveillance systems, and makes it
easier to identify the camera.
Camera 1 / Camera 2:
Enter a unique, unambiguous name for the camera in this field.
Bosch Security Systems | 2005-05 | V1.0 Configuration using a Web Browser