Diagnostics - Led Test - Star Trac Pro Bike 6000 Series Service Manual

Pro Bike (6000 Series) Service Manual
Diagnostics – LED Test
The LED Test can be used to verify that all LED (lights) are
functioning on the display assembly.
To engage the LED Test
1. Enter the Maintenance Mode (see Settings – Maintenance
Mode).
2. Press
window.
3. Press
should be on.
4. Check for any burned out lights.
5. To exit the LED Test, press
If any of the LED's do not illuminate, they may not be functioning
and the display electronics may need to be replaced.
3.2
until LED Test is display in the information
to enter the LED Test. All lights on the display
Diagnostics – Pro Tread (6000 Series)
Created: 06/28/04 • Preliminary Service Manual
.