Table of Contents
Advertisement
4.0 INSTALLATION
4.1
CrATEd uNIT CONTAINS
•
electrical harness (1 pc.)
•
bricks (25 pcs.)
•
baffles (2 pcs.)
•
Secondary Air Tubes (4 pcs.)
•
installation and operating manual
•
limit Switch and mount bracket (Plenum) (2 pcs.)
•
Pleated filter and frame (2 pcs.)
•
Painted black cast door and handle (2 pcs.)
4.2
rECOmmENdEd STEP
CAUTION
mAnoeuvring And PAlleT re-
movAl requireS A minimum of
TWo PeoPle.
THE BAsE pALLET Is sECURED TO THE FURNACE BY ADjUsTINg THE LEgs AT THE BOTTOM OF
THE BAsE pALLET sHOULD NOT BE REMOvED UNTIL THE FURNACE Is pLACED CLOsE TO ITs
LIFTINg OF THE FURNACE sHOULD BE THROUgH THE BAsE pALLET - LIFTINg OF FURNACE BY
THE INsTALLATION OF THE FURNACE MUsT BE DONE IN ACCORDANCE wITH RULEs OF AU-
THORITIEs HAvINg jURIsDICTION AND THE CAN / CsA B365-01 (R2006) sTANDARD FOR sOLID
if the crating is too large for maneuvering in the doorways and staircases, remove the crate verticals, diagonals
and top pallet.
high cenTre of grAviTy! ThiS uniT iS very ToP
heAvy! uSe cAuTion When mAnoeuvring or re-
moving The furnAce from The bASe PAlleT.
THE FURNACE.
FINAL INsTALLATION LOCATION!
METAL BAsE HOUsINg CAN REsULT IN DAMAgE
FUEL BURNINg AppLIANCEs AND EqUIpMENT.
CAUTION
lifTing PoinTS
11
lifTing PoinTS
W415-1066 / A / 03.06.12
Advertisement
Table of Contents
