Connecting Two Monitors With Vga Connectors; Connecting One Monitor With A Vga Connector And One Monitor With A Dvi Connector; Connecting A Tv - Dell OptiPlex 330 User Manual

3 clips (2)
5 parallel printer cable
4. Turn on the printer and then turn on the computer. If the Add New Hardware Wizard window appears, click Cancel.
5. Install the printer driver if necessary. See the documentation that came with your printer for instructions.
Connecting Two Monitors
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
If you purchased a graphics card that supports dual monitors, follow these instructions to connect and enable your monitors. The instructions tell you how to
connect either two monitors (each with a VGA connector), one monitor with a VGA connector and one monitor with a DVI connector, or a TV.
NOTICE: If you are connecting two monitors that have VGA connectors, you must have the optional DVI adapter to connect the cable. If you are
connecting two flat-panel monitors, at least one of them must have a VGA connector. If you are connecting a TV, you may connect only one monitor (VGA
or DVI) in addition to the TV.

Connecting Two Monitors With VGA Connectors

1. Shutdown your system.
NOTE: If your computer has integrated video, do not connect either monitor to the integrated video connector. If the integrated video connector is
covered by a cap, do not remove the cap to connect the monitor or the monitor will not function.
2. Connect one of the monitors to the VGA (blue) connector on the back of the computer.
3. Connect the other monitor to the optional DVI adapter and connect the DVI adapter to the DVI (white) connector on the back of the computer.
4. Restart your system.
1 optional DVI adapter
3 TV-OUT connector

Connecting One Monitor With a VGA Connector and One Monitor With a DVI Connector

1. Shutdown your system.
2. Connect the VGA connector on the monitor to the VGA (blue) connector on the back of the computer.
3. Connect the DVI connector on the other monitor to the DVI (white) connector on the back of the computer.
4. Restart your system.

Connecting a TV

4 notches
6 screws (2)
2 DVI (white) connector
4 VGA (blue) connector