Connecting Two Monitors; Connecting Two Monitors With Vga Connectors - Dell DIMENSION XPS GEN 3 WHL User Manual

5
Click Front LED Color, and press <Enter>.
6
Press the left- and right- arrow keys to scroll through the color options. The backlight color
changes as you scroll through the options.
7
Select the color you want, and press <Enter>.
8
Press <Esc>, and press Save and Exit to save the new backlight color setting.

Connecting Two Monitors

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
NOTE:
If you are connecting two monitors that have VGA connectors, you must have the optional DVI
adapter. If you are connecting two flat-panel monitors, at least one of them must have a VGA connector.
If you are connecting a TV, you may connect only one monitor (VGA or DVI) in addition to the TV.
NOTE:
See the documentation that came with your TV to ensure that you properly configure and connect
the TV.
If you purchased a graphics card that supports dual monitors, follow these instructions to connect
and enable your monitors. The instructions tell you how to connect either two monitors (each with
a VGA connector), one monitor with a VGA connector and one monitor with a DVI connector, or
a TV.

Connecting Two Monitors With VGA Connectors

1
Follow the procedures in "Before You Begin" on page 61.
NOTE:
If your computer has integrated video, do not connect either monitor to the integrated video
connector. If the integrated video connector is covered by a cap, do not remove the cap to connect the
monitor or the monitor will not function.
2
Connect one of the monitors to the VGA (blue) connector on the back of the computer.
3
Connect the other monitor to the optional DVI adapter and connect the DVI adapter to the
DVI (white) connector on the back of the computer.
Setting Up and Using Your Computer
15