Parts Provided - Monogram ZV48T Installation Instructions Manual

PARTS PROVIDED

Locate the parts packed with the hood.
Duct Transition
(2 with 48" models)
Allen Wrench
For Implement Rods
HARDWARE
PACKAGE
Locate and check con-
tents. Screws shown
actual size.
2 (3/16") hollow wall an-
chors with screws to secure
hood to the wall at the
6 Phillips head screws to
secure hood to the wood
support: (2 secured to
10
Installation Preparation
with Damper
2 Stainless Steel Grease Filters
Heat Lamp
2 Implement Rods and 4 Stand-offs
bottom
wood support)
4 Phillips head screws to
secure the transition to
the hood outlet on the top
for wall anchors
Wood Support
with Original Screws
2 Grease Filter Trays
(3 supports with 48" models.)
4 screws to secure the
wood support to the wall
POZIDRIV 3
1 safety screw and lock
washer, to secure the
blower: (screw is marked
with red or blue paint)
49-80151-8