Parts Provided - Monogram ZV48S Installation Instructions Manual

PARTS PROVIDED

Locate the parts packed with the hood.
Duct Transition
761Dia28
(2 with 48" models)
Allen Wrench
For Implement Rods
490Dia57
HARDWARE PACKAGE
Locate and check contents. Screws
shown actual size.
2 (3/16") hollow wall anchors
with screws to secure hood to
the wall at the bottom
6 Phillips head screws to
secure hood to the wood
support: (2 secured to
761Dia68
1" = 2.5 cm; 1' = 0.3 m
49-80152 Rev. 8
Installation Preparation
with Damper
2 Stainless Steel Grease Filters
(3 filters with 48" models)
Heat Lamp
2 Implement Rods and 4 Stand-offs
wood support)
761Dia17
761Dia30
2 flat washers
for wall anchors
658Dia9
1 safety screw and lock
washer, to secure the blower:
(screw is marked with red or
blue paint)
Wood Support
with Original Screws
490Dia66
2 Grease Filter Trays
(3 supports with 48" models.)
4 Phillips head screws to
secure the transition to the
hood outlet on the top
4 screws to secure the wood
support to the wall
POZIDRIV 3
9