Kyocera Mita FS-1000+ Installation Manual page 7

Ifs10ep-jp.book Page 5 Friday, December 22, 2000 4:27 PM
To remove the toner container
Lock Lever #2
Lock Lever #1
7
Push the lock lever to the lock (LOCK)
position.
8
Close the top cover.
When the printer is first
switched on after toner installa-
tion, there will be a delay of
approximately 15 minutes
before the printer gets ready to
print.
Pull the lock lever #1 to the release
(UNLOCK) position, pull the lock lever
#2, then gently remove the toner con-
tainer.
5
Go to next page