Sending A Trunk Flash (Not For Hipath 500) - Siemens HiPath 500 Operating Instructions Manual

Enhanced phone functions
Step by Step
Calls g
Trunk flash
76

Sending a trunk flash (not for HiPath 500)

To activate ISDN-type services and features through the
network carrier's analog trunks or those of other com-
munications platforms (such as "consultation hold"), you
must send a signal to the trunks before dialing the ser-
vice code or telephone number.
Prerequisite: You have set up an external connection.
v
Open the Program/Service menu
Select and confirm the option shown.
Select and confirm the option shown
j
Enter the service code and/or telephone number.
[1] "Different displays in a HiPath 4000 environment (not for HiPath 500)"
page 165
page 37.
[1]
.