Using Team Functions; Activating/Deactivating A Group Call - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Leave group
Join group
S

Using team functions

If configured (consult your service personnel), your tele-
phone is part of a team. The team consists of internal
phones that are able to use certain functions.

Activating/deactivating a group call

If configured (consult your service personnel), you be-
long to one or more groups of stations, which can be
reached via hunt group or group call station numbers.
Incoming calls are signaled one after the other (= hunt
group) or simultaneously (= group call) on all phones in
the group, until a group member answers the call.
You can also belong to a team (including executive/sec-
retary configurations) in which station numbers are pro-
grammed on trunk keys
Every group member can still be reached at his or her
personal phone number.
You can activate and deactivate the audible signal for a
hunt group, group call or individual trunks in a group (in-
cluding executive/secretary).
If the LED on a programmed "Hunt group" key is illumi-
nated
activated for at least one group.
This function is not available for the executive
phone in team/executive/secretary configura-
tions.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work)
c
Open the idle menu
Select and confirm the option shown
or
Select and confirm the option shown.
or
R
or
Press the "Hunt group".
[1] "Different displays in a HiPath 4000 environment (not for HiPath 500)"
page 165
page 122.
page 79, this means that the audible tone was
page 136!
page 25.
Using team functions
[1]
.
131