Answering A Call Via The Loudspeaker (Speakerphone Mode); Switching To Speakerphone Mode - Siemens HiPath 500 Operating Instructions Manual

Step by Step
Answer
if nec.
if nec.
if nec.
Answering a call via the loudspeaker
(speakerphone mode)
Suggestions for using speakerphone mode
• Tell the other party that speakerphone mode is ac-
tive.
• Adjust the call volume while speakerphone mode is
active.
• The ideal distance between the user and the phone
in speakerphone mode is about 50 cm.
The phone is ringing. The caller is displayed.
n
Press the key shown. The LED lights up.
or
Confirm.
The speakerphone function is activated.
X
Set the call volume.
Ending a call
n
Press the key shown. The LED goes out.
or
s
Press the key shown.

Switching to speakerphone mode

People present in the room can participate in your call.
Prerequisite: You are conducting a call via the handset.
n]
Hold down the key and replace the handset. Then re-
lease the key and proceed with your call.
X
Set the call volume.
U.S. mode
If your communication system is set to US mode (con-
tact your service personnel), you do not have to hold
down the speaker key when replacing the handset
when switching to speakerphone mode.
n
Press the key shown.
]
Replace the handset. Proceed with your call.
X
Set the call volume.
Basic functions
41