Controlling Relays (Hipath 3000 Only) - Siemens HiPath 500 Operating Instructions Manual

Special functions in the LAN (not for HiPath 500)
Step by Step
DISA intern
Control Relay On
Control Relay Off
140

Controlling relays (HiPath 3000 only)

If this feature is configured (contact your service person-
nel), you can also control relays
HiPath 3000 communications platforms.
c
Open the idle menu
Select and confirm the option shown.
j
Enter the (DISA) station number of the HiPath 3000,
where you wish to control the relay.
i #
or
Confirm your entry.
j
Enter the (DISA) station number of the phone you wish
to use to control the relay.
i #
or
Confirm your entry.
Confirm,
or
select and confirm the option shown.
1 4
... Enter the relay.
page 120 in other
page 25.