Tray Use In Fax Mode (Mfc-J6710Dw Only); Secure Paper Feed Mode For A3 Size Short Grain Paper - Brother MFC-J6510DW User Manual

Chapter 2
Tray use in Fax mode
(MFC-J6710DW only)
You can change the default tray the machine
will use for printing received faxes.
Auto Select will allow your machine to
take paper from Tray #1 first, or from Tray #2
if:
 Tray #2 is set to a different paper size that
is more suitable for the received faxes.
 Both trays are using the same size paper
and Tray #1 is not set to use plain paper.
a
Press Tray Setting.
b
Press a or b to choose Tray Use:Fax.
c
Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
d
Press a or b to choose Complete.
Press OK.
24
Secure Paper Feed mode for
A3 size Short Grain Paper
2
If your prints have horizontal lines when using
A3 paper, your paper may be long grain
paper. Set A3 - Short Grain to Off to
avoid this problem.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose
A3 - Short Grain.
d
Press d or c to choose Off.
Press OK.
e
Press Stop/Exit.
Note
• If you are not sure about the type of paper
you are using, consult the paper
packaging or manufacturer for paper
specifications.
• Printing will be slower when using the
A3 - Short Grain setting On.
2