Specifications - Panasonic WJ-ND400K Installation Manual

Specifications

• General
Power source:
Power consumption:
Ambient operating temperature:
Ambient operating humidity:
Maximum operating altitude:
Dimensions:
Mass:
• Hard disk drive (Contact your dealer about purchasing hard disk drives.)
Hard disk drive:
• Input/Output
External storage:
Alarm/Control connector:
Alarm connector:
Client PC port:
Camera port:
Maintenance port:
*1 Non-voltage make contact, +5 V pull-up 150 kΩ
*2 Open collector output, 24 V DC max., 100 mA
*3 High (+5 V to +12 V, 6.3 mA max.)
*4 52 kΩ, +5 V pull-up, Output current: 100 mA/Non-voltage make contact input
*5 200 mA max.
60
NTSC model: 120 V AC, 60 Hz
PAL model: 220 V to 240 V AC, 50 Hz
170 W
5 °C to 45 °C {41 °F to 113 °F}
5 % to 90 % (non condensing)
2 000 m {6 562 feet} above sea level
430 mm (W) x 132 mm (H) x 400 mm (D)
{16.93 inches (W) x 5.20 inches (H) x 15.95 inches (D)}
(excluding rubber feet and projections)
When no HDD is installed: 13 kg {28.7 lbs}
When 9 HDDs are installed: 20 kg {44.15 lbs}
3.5 type hard disk drive x (Up to 9 hard disk drives can be installed.)
RAID 5 (Available only when 3 or more hard disk drives are installed.)
RAID 6 (Available only when 4 or more hard disk drives are installed.)
High-speed serial interface, 1.5 Gbps (theoretical value), x5
1
Alarm input 8-16 ch* , Network error output*
1
recording input* , Available disk space warning output*
2 2
error output* , Error output* , Outage processing end output*
4 2
output* , Alarm output* , Alarm suspension input*
1
recording mode changeover*
1
Alarm input 1-7* , Alarm input 17-32*
10BASE-T/100BASE-TX/1000BASE-T (RJ-45)
10BASE-T/100BASE-TX/1000BASE-T (RJ-45)
10BASE-T (RJ-45)
2
, Alarm reset input*
2
, HDD error output*
1
, Outage detection input*
5
, +5 V output* (D-sub 25-pin)
1
(D-sub 25-pin)
1
, Emergency
2
, Camera
3
, Time adjustment input/
1
, External