Ask Proxima US1275 User Manual page 53

Problems
No image
Ineffective power control
Ineffective icon selection
Ineffective automatic setting
Distorted image or no image
The PIN code dialog box pops
up in the startup process
Remote control doesn't work
The indicator is illuminated or
flashes
Exclamatory mark appears on
the screen
The side control panel doesn't
work
PIN code lock for startup
animation, key lock and PIN
code lock can't be unlocked.
Warning:
Is operated with high voltage. Do not open its casing!
If the problem still exists after you take the aforesaid measures, you should contact the local distributor
or the repair center and state the machine model. The projector will tell you how to handle the issue.
– Solutions
- Check the connection between PC or video equipment
- Check that the signal from PC is correct. If connected to
certain laptops, the settings of their video adapters need to be
changed.You can refer to the operating instructions of the PC
for such modification.
- Images can show up only about 20 seconds after the projector
is powered on.
- Check the input signal, color system, video system or PC
system mode.
- Make sure that the temperature doesn't exceed the permitted
operating temperature (41
- If non-displaying function is enabled, no image will appear on
the screen. You can then press the non-display key or other
keys.
- When the system is standstill, or no-display function is enabled,
the power control is ineffective.
- Check the wiring and the signal of input source, and make sure
there is signal.
- Make sure all functions in automatic setting are enabled.
- Make sure the function of ceiling is not enabled.
- Check and adjust the PC menu or on-screen menu.
- A PIN code is set for locking.
- Check the battery.
- Make sure there is no obstacle between the projector and the
remote control.
- To use the remote control, keep it within 5 meters away from
the projector.
- Make sure the code of the remote control is consistent with the
projector.
- Unlock the key through the setup menu.
- Check the state of the projector according to the indicator.
- Ineffective operation. You should operate the system correctly.
- Unlock the keys on the side control panel through the item
"security" in the setup menu.
- Contact the local distributor or the repair center.
˚ ˚ ˚ ˚
F–95 F [5 C–35 C]).
Appendix
53