Advanced Setting - Ask Proxima US1275 User Manual

Advanced setting

Advanced setting
You can access advanced functions stated below through the "Advanced setting" menu of the
projector.
1 Press MENU button to display the screen
menu. Press  button to select Advanced
setting icon and then press  or OK button.
2 Press  to select the desired item to be
adjusted, and then press  or OK enter the
item.
3 Press  to select the item, press
 button.
Language
The language used in screen menu is available
in English,Frech, Spanish,Portuguese, Dutch,
Italian, Japanese, Korean, Russian, Finnish,
Dutch, Thai, Vietnamese, Turkish, Afrikaans,
Bahasa Indonesia, Farsi, Arabic, Chinese.
Menu position
You can use this function to change the
position of screen menu.
Press  select Menu position and press 
or OK to enter the menu position.
Press  to switch the items: Upper left,
Upper right, Center, Lower left, Lower right.
Auto setup
Allows you to perform input search, auto PC
adjustment automatically, press the AUTO
button on the top control or remote control. The
functions can be switched based on the steps
below.
Input search
Allows you to automatically detect input
signals. It stops when a signal is found.
Press to select an option from:
On........Enabled. This function is used to
detect input signals automatically
and stops when finding a signal.
Off........Disabled.
Auto PC adj
On........Press the AUTO button on the top
control or remote control to enable
Auto PC adj function automatically.
Off........Disable.
Advanced setting menu
Advanced setting
Language
Menu position
Auto setup
Logo
Power management
Closed caption
Security
Test pattern
Filter counter
Warning log
Factory default
Exit - - - - Move
Note:
 Only the last selected input source can be
detected.
 If INPUT button on the top control or the
VGA 1/VGA 2 buttons, VIDEO or S-video or
YCBCR button on the remote control is
pressed during Input search is in progress,
Input search will stop and go back to the
previous input signal.
 Fine sync, Total dots, Horizontal and Vertical
position of some computers cannot be fully
adjusted with the Auto PC Adjustment
function. When the image is not provided
properly with this operation, manual
adjustments are required.
Next Next
41