Ask Proxima US1275 User Manual page 43

Power management
Reduce power consumption as well as maintain the lamp life, the Power management function
turns off the projection lamp when the projector is not operated for a certain period.
Select one of the following options:
Ready .................. When the lamp has been fully cooled down, the POWER indicator changes to
green blinking.In this condition, the projection lamp will be turned on if the input
signal is reconnected or any button on the side control or remote control is
pressed.
Shut down .......... When the lamp has been fully cooled down, the power will be turned off.
Off ....................... Power management function is off.
Timer ................... If the input signal is interrupted and no button is pressed for more than 30
seconds, the timer display with No signal appears. It starts the countdown until
the lamp is turned off. Press  buttons to set the Timer(1~30min.)
√ Note:
Factory default is Ready: 5 Min.
Closed Caption
Allows the subtitle to be displayed for the audio contents or other information. If the input source
contains closed caption, you can enable this function and change the channel. Press  to select
OFF, CC1, CC2, CC3 or CC4.
If Closed Caption is not clear, you can change the text color to white from the original.
√ Note:
Only under the following circumstances can you select Closed Caption:
● The input is composite video signal or S-Video in the N TSC system.
● The system should be set to NTSC or Auto in the video system.
● The icon of Closed Caption appears dimmed when unavailable.
● Closed Caption cannot be selected when the screen menu and Timer is displayed.
Advanced setting
Power management
No signal
01 : 20
Time left before Lamp is off.
43