Garmin GTN 725 Cockpit Reference Manual page 72

Message
GNS CROSSFILL-
GTN user waypoint(s)
replaced with GNS user
waypoint(s).
GNS CROSSFILL-
Catalog full; not all
GNS waypoints(s)
transferred.
GNS CROSSFILL-
Waypoint transfer
failed.
GPS NAVIGATION LOST-
Insuffi cient satellites.
Use other navigation
source.
GPS NAVIGATION LOST-
Erroneous position. Use
other navigation source.
GPS RECEIVER-
GPS receiver has failed.
Check GPS coax for
electrical short.
GPS RECEIVER-
Low internal clock
battery.
64
Description
A user waypoint from the
GNS replaced one or more
exisiting waypoints on the
GTN.
A user waypoint from
the GNS could not be
created because the user
waypoint catalog is full.
Waypoint tranfer failed/
incomplete.
GPS position has been
lost due to lack of
satellites.
GPS position has been
lost due to erroneous
position.
Internal communication
to the GPS module is
inoperative.
The GPS module indicates
that its clock battery is
low. The unit will function
normally, but may take a
longer than normal period
to acquire a GPS position.
GTN 725/750 Cockpit Reference Guide (CRG)
Action
Ensure that the waypoints
on the GNS have unique
names before transferring
to the GTN to avoid
overwriting existing
waypoints.
Remove some of the
waypoints from the catalog
to make room for the
waypoints from the GNS.
The data transfer should be
reattempted.
Use a different GPS receiver
or a non-GPS based source
of navigation. Contact
dealer for service.
Use a different GPS receiver
or a non-GPS based source
of navigation. Contact
dealer for service.
Use a different GPS receiver
or a non-GPS based source
of navigation. Contact
dealer for service.
Contact dealer for service.
190-01007-04 Rev. C