Crossfi Ll - Garmin GTN 725 Cockpit Reference Manual

Crossfi ll
Dual units may be interfaced to crossfi ll information between the two units.
This option will not be available unless dual units are confi gured.
The following data is always crossfi lled, GTN-to-GTN:
• User waypoints
• Flight plan catalog
• Alerts (Pop-up acknowledgement for traffi c, missed approach waypoint,
and altitude leg)
• External sensors (transponder status and commands, synchro heading)
• System setup
Favorite NAV frequencies
Date/Time convention
Nearest airport criteria
Units (NAV angle, Distance/Speed, etc.)
Favorite COM frequencies
Ownship icon
CDI Scale setting
ILS CDI Capture setting
This data is crossfi lled only if crossfi ll is turned on by the pilot:
• Active navigation (fl ight plan)
1. While viewing the System Setup page, touch the Crossfi ll key
between Enabled and Disabled Crossfi ll.
2. When Crossfi ll is about to be enabled, you will be prompted to note that
data will be overwritten in the other unit. Touch OK to enable Crossfi ll
or touch Cancel to return to the System Setup page without enabling
Crossfi ll.
190-01007-04 Rev. C
Confi rming Crossfi ll Selection
GTN 725/750 Cockpit Reference Guide (CRG)
Touch OK to enable
crossfi ll with dual units.
to toggle
45