Garmin GTN 725 Cockpit Reference Manual page 54

GTN-GNS Crossfi lling:
• GTN to GNS – Active fl ight plans, active direct-to, User waypoints
• GNS to GTN – User waypoints
1. While viewing the System Setup page, touch the GNS Crossfi ll Settings
to reach the GNS Crossfi ll settings.
key
2. Touch Auto GNS Crossfi ll to enable Crossfi ll and send the Active Flight
Plans and the active Direct-To course to the GNS unit.
3. Touch the Transfer User Waypoints key to transfer the User Waypoints
from the GTN unit to the connected GNS unit.
46
GTN-GNS Crossfi ll Selection
GTN-GNS Crossfi ll
GTN 725/750 Cockpit Reference Guide (CRG)
Touch OK to Enable Auto
Crossfi ll With Dual Units
Touch OK to Manually
Transfer User Waypoints
Transfer Of User
Waypoints In Progress
190-01007-04 Rev. C