Hardware Installation; Precautions; Package Contents - Symbol AP-5131 Installation Manual

3

Hardware Installation

An AP-5131 installation includes mounting the AP-5131 on a table-top, wall, ceiling T-bar or above
the ceiling orientation, connecting the AP-5131 to the network (LAN or WAN port connection),
connecting antennas and applying power. Installation procedures vary for different environments.

3.1 Precautions

Before installing the AP-5131 verify the following:
• Do not install in wet or dusty areas without additional protection. Contact a Symbol
representative for more information.
• Verify the environment has a continuous temperature range between -20° C to 50° C.
3.2

Package Contents

Check package contents for the correct model AP-5131 and applicable AP-5131 accessories. Each
available configuration (at a minimum), contains:
• AP-5131 (two base models available)
• Single 802.11a/g radio, external antenna (Part No. AP-5131-4002X-WW)
• Dual 802.11a+g radio, external antenna (Part No. AP-5131-1304X-WW)
• AP-5131 Software and Documentation CD-ROM
• AP-5131 Install Guide
• Accessories Bag (4 rubber feet for desk mounting and a LED light pipe and badge with label
for above the ceiling installations)
NOTE
Verify the model indicated on the bottom of the AP-5131 is correct. Contact the Symbol Support
Center to report missing or improperly functioning items.
There are numerous SKUs available containing at least one AP-5131
radio model (either 802.11a or 802.11b/g), CD-ROM, Install Guide and
Accessories Bag. However, some SKUs contain various antenna and
Symbol Power Injector combinations.
Refer to the AP-5131 Product Reference Guide to familiarize yourself with
all available AP-5131 product SKUs. The guide is on the CD-ROM shipped
with the AP-5131, or can be found at
(http://www.symbol.com/services/downloads.html).
Hardware Installation 5