Basic Ap-5131 Configuration - Symbol AP-5131 Installation Manual

22 AP-5131 Access Point: Installation Guide
802.11b/g Radio Activity
The LEDs on the rear of the AP-5131 are viewed using a single (customer installed) extended light
pipe, adjusted as required to suit above the ceiling installations. The LEDs displayed using the light
pipe have the following color display and functionality:
Boot and Power Status
Error Conditions
4

Basic AP-5131 Configuration

For the basic setup described in this guide, the Java-based Web UI will be used to configure the
AP-5131. Use the AP-5131's LAN interface for establishing a link with the AP-5131. Configure the
AP-5131 as a DHCP client. For optimal viewing of the Web UI, the screen resolution should be set to
1024 x 768 pixels or greater.
NOTE
Flickering green indicates beacons and data
transfers over the AP-5131 802.11b/g radio.
Solid white indicates the AP-5131 is adequately
powered.
Solid red indicates the AP-5131 is experiencing
a problem condition requiring immediate
attention.
Blinking red indicates the AP-5131 Rogue AP
Detection feature has located a rogue device.
For advanced configuration options beyond the scope of this guide, refer
to the AP-5131 Product Reference Guide. The guide is on the CD-ROM
shipped with the AP-5131, or can be found at
(http://www.symbol.com/services/downloads.html).