Main Cover - Xerox Phaser 3117 Service Manual

5.2.3 SMPS Cover
1.Release two screws.
(Screw x2:Silver_M3,6003-000196)

5.2.4 Main Cover

1.Before Disassembling.
-Separate the font cover.(Refer to 5.2)
-Separate the SMPS cover.(Refer to 5.3)
x
2.Separate the lock by holding the left side of the cover
and pulling it toward the arrow direction. Remove it
with carefulness that the power switch is not hooked
on SMPS cover as shown as below.
1
2.Release 4 screws as shown as below.
(Screw x 4 : Silver_M3,6003-000196)
Disassembly and Reassembly
SMPS Cover
2
Service Manual
5-3