Setup - Shop fox W1727 Owner's Manual

Inventory
The following is a description of the main components
carefully packaged with your
1 HP Dust collector. See Figure 9 and refer to the list
below and inventory your shipment.
If any part is missing, examine the packaging carefully to
be sure the part is not among the packing materials. If
the part is not found, find the part number in the back
of this manual and contact Woodstock International, Inc.
at 360-734-3482 or at tech-support@shopfox.biz
B
F
E
G
I M
H
Figure 9. Dust collector inventory.
A. Elbow 4"
B. Base
C. Upper Bag
D. Lower Bag
E. Round Support
F. Rectangle Supports (2)
G. Bag Support
H. Swivel Casters (2)
I. Fixed Casters (2)
J. Impeller/Separator
K. Bag Clamps (2)
L. Handle
M. Hardware Bag
• Hex Bolt ⁄ "-18 x
5
16
• Acorn Nut
⁄ "-18 (2)
5
16
• Flat Washer
⁄ " (2)
5
16
• Flat Head Screw ⁄
5
• Flange Screw 10-24 x
• Open-End Wrench 10-12MM (1)
• Hex Wrench 5mm (1)
• Cap Screw M6-1 x 10 (4)
• Phillips Hd Screw #10-24 x

SETUP

SHOP FOX
Model W1727
®
J
L
K
C
D
⁄ " (6)
1
2
"-18 x 1" (2)
16
⁄ " (1)
3
8
⁄ " (1)
1
2
Model W1727 (For Machines Mfg. Since 5/09)
Immediately discard all plastic bags
and packing materials to eliminate a
choking and suffocation hazard for
children and animals.
A
READ and understand this entire instruc-
tion manual before using this machine.
Serious personal injury may occur if
safety and operational information is not
understood and followed. DO NOT risk
your safety by not reading!
UNPLUG the power cord before you
do any assembly or adjustment tasks!
Otherwise electrocution may occur!
-10-