Table of Contents
Advertisement
Available languages
Available languages
4
EN
Basic Connections
Connect the power plug to an
AC outlet before installing the
lithium battery. (See below)
AC Outlet
AC Power Cord
Back of VCR
Back of VCR
VIDE
CH3
CH4
Be sure to connect the power plug to an AC outlet first
before installing the lithium battery; otherwise, the
battery's service life will be drastically shortened.
INSTALLING YOUR NEW VCR
Antenna or Cable
Matching Transformer
(not supplied)
TV
75 ohm terminal
300 ohm terminal
Installing/Removing the lithium battery
1
Make sure that the power plug is connected to an AC outlet
and turn off the VCR power.
2
Open the battery cover while pressing the release tab as
illustrated.
3
Insert a lithium battery with the plus (+) side up and push it
in.
To remove the lithium battery, press the latch A down-
ward using a pointed non-metallic object, then pull out
the lithium battery.
4
Close the battery cover until it clicks in place.
A
Coaxial Cable
Flat Feeder
CH3
CH4
Audio/Video Cable
(not supplied)
ANT. IN
(Antenna or Cable input)
ANT. IN
OUT
AUDIO
RF OUT
VIDEO
RF OUT
RF Cable
(supplied)
Advertisement
Chapters
Table of Contents
