JVC HR-DVS3EU Instructions Manual page 49

A
If the camcorder has no S-VIDEO output connector ...
Recorder
Mini-plug cable
(not provided)
(JVC camcorder only)
EDIT
Camcorder
AUDIO OUT
VIDEO OUT
Player
C
If the camcorder has a DV IN/OUT connector ...
Recorder
DV IN/OUT
DV cable (VC-VDV204)
(not provided)
DV IN/
OUT
Camcorder
EDIT
Player
VIDEO input
1 3 2
PAUSE
connector
AUDIO input
Audio cable
(not provided)
Video cable
(not provided)
1 3 2
PAUSE
connector
Mini-plug cable
(not provided)
(JVC camcorder only)
B
If the camcorder has an S-VIDEO output connector ...
Recorder
Mini-plug cable
(not provided)
(JVC camcorder only)
EDIT
Camcorder
AUDIO OUT
S-VIDEO OUT
Player
NOTES:
About DV IN/OUT connector
● To output digital signal when dubbing from the VHS deck to
other device through the DV IN/OUT connector, press
then press 4 to start playback on the VHS deck.
● To input digital signal when dubbing from other device to the
VHS deck through the DV IN/OUT connector, press
then press 7 to start recording on the VHS deck.
● It is possible to control the DV deck from the AVC protocol-
equipped device that is connected to the DV IN/OUT connector.
To control the VHS deck, use the buttons on this recorder and
the remote control.
● All necessary cables can be obtained from your dealer.
● When you select "EDIT" to dub tapes in step 4, be sure to select
"AUTO" (or "NORM" when "B.E.S.T." is set to "OFF") after you
finish dubbing the tapes.
● When you are editing through the DV IN/OUT connector, the
recorder will stop if the player begins playing a blank portion of
tape or the signal is interrupted.
● When connecting this recorder to a device equipped with a DV
input connector, be sure to use the optional DV cable
(VC-VDV204).
49
EN
S-VIDEO input
1 3 2
PAUSE
connector
AUDIO
input
Audio cable
(not provided)
S-Video cable
(not provided)
,
,
and
and