Route Planning Options - Clarion NP509 User Manual

4.5.3 Route Planning options

These settings determine how routes will be calculated. Tap the following buttons:
.
Button
Vehicle
Road Types Used for Route
Planning
Route Calculation Method
Vehicle types:
x
Car
x
Taxi
x
Bus
x
Emergency vehicles
Road Types Used for Route Planning:
Type
Freeways You might need to avoid freeways when you are driving a slow car or you are
towing another vehicle.
Unpaved roads Clarion Mobile Map excludes unpaved roads by default: unpaved roads can be
in a bad condition and usually you cannot reach the speed limit on them.
Toll roads By default Clarion Mobile Map includes toll roads (pay roads where there is a
per-use charge) in the routes. If you disable toll roads, Clarion Mobile Map plans
the best toll-free route.
Charge roads
Charge roads are pay roads where you can purchase a pass or vignette to use
the road for a longer period of time. They can be enabled or disabled separately
from toll roads.
68
You can set the type of vehicle you will use to navigate the route.
Based upon this setting, some of the road types can be excluded from
the route, or some of the restrictions may not be taken into account in
route calculation.
To let the route fit your needs, you can also set which road types are
to be considered for or to be excluded from the route if possible.
Excluding a road type is a preference. It does not necessarily mean
total prohibition. If your destination can only be accessed using some
of the excluded road types, they will be used but only as much as
necessary. In this case a warning icon will be shown on the Route
Information screen, and the part of the route not matching your
preference will be displayed in a different color on the map.
You can choose from different route types. The routing method can be
changed temporarily while creating the route: when the destination is
selected, tap
Description
in the Cursor menu.
Description
, ,