Navigating With Clarion Mobile Map; Selecting The Destination Of A Route; Selecting The Cursor As The Destination - Clarion NP509 User Manual

3 Navigating with Clarion Mobile Map

You can set up your route in Clarion Mobile Map in several ways:
x
if you need a simple route (a route with only one destination, without any intermediate via
points), you can select the destination and start navigating to it right away
x
you can plan a multi-point route (available in Advanced mode only)
x
you can also plan a route independently of your current GPS position or even without GPS
reception (available in Advanced mode only)

3.1 Selecting the destination of a route

Clarion Mobile Map offers you several ways of choosing your destination and via points (intermediate
destinations):
x
Use the selected location on the map (the Cursor) (page 28).
x
Enter a full address or a part of an address, for example a street name without a house number
or the names of two intersecting streets (page 29).
x
Enter an address with ZIP code (page 35). This way you do not need to select the name of the
city and the search for street names might be faster as well.
x
Use a coordinate (page 38)
x
Use a saved location:
x
a Favorite (page 36)
x
a POI (page 36)
x
the History of previously set destinations and waypoints (page 38)
Tip!
If you are going to use a route later, save it before you start navigating. Tap the
following buttons:

3.1.1 Selecting the Cursor as the destination

1. Locate your destination on the map: move and scale the map as needed (page 13).
2. Tap the location that you want to select as your destination. The Cursor (
3. Tap to open the Cursor menu.
4. The map appears with the selected point in the middle. Tap
mode) or
automatically calculated, and you can start navigating.
28
, ,
(Advanced mode) from the Cursor menu. The route is then
.
) appears.
(Simple