Sound Settings - Clarion NP509 User Manual

Button
Elevation on 2D Map
Street Names During
Navigation
Lane Information
Interrupt AV

4.5.2 Sound settings

You can adjust the sounds of Clarion Mobile Map. Tap the following buttons:
.
Button
Master Volume
Voice Guidance Volume
Key Sounds
Dynamic Volume
Trigger Tone
2D maps can also display 3D information. These top-down maps can
display elevation by colors and shading.
Street names and POI icons can be disturbing on the map during
navigation. With this switch you can suppress these map elements when
Clarion Mobile Map is following your position on the map. If you move
the map, both the street names and POI icons reappear immediately.
Some maps contain lane information to help you position your car in the
upcoming intersection. This setting tells Clarion Mobile Map whether to
display this information at the top or at the bottom of the map.
When Clarion Mobile Map is working in the background, the map can be
displayed on the screen when approaching a maneuver.
Use the switch to mute all sounds of the device and then to re-enable
them again. The position of the slider determines the volume level.
The slider adjusts the loudness of voice prompts. In its leftmost position,
the voice guidance is suppressed; in its rightmost position, the master
volume applies.
Key sounds provide audible confirmation of either pressing hardware
buttons or tapping the touch screen.
The switch turns key sounds on or off. Key sounds are played at the
master volume level.
When driving at high speed, the noise in the car may be too loud to
clearly hear the voice guidance and other sounds. Using Dynamic
Volume you can instruct Clarion Mobile Map to increase the volume
when your speed exceeds a certain minimum, and reach its highest
volume at the given maximum speed.
A special sound played before voice instructions.
Description
Description
, ,
67