Entering An Address With A Zip Code - Clarion NP509 User Manual

3.1.2.6 Entering an address with a ZIP code

All of the above address searching possibilities can be performed with entering the ZIP code instead
of the city name. Find below an example with a full address:
The procedure is explained starting from the Navigation menu.
1. Tap the following buttons:
2. By default, Clarion Mobile Map proposes the country/state and city where you are. If needed,
tap the button with the name of the country/state, and select a different one from the list.
3. Tap the button with the name of the city, and enter the ZIP code:
1. Start entering the ZIP code on the keyboard.
2. Get to the list of results:
x
After entering a couple of numbers, matching results appear in a list.
x
Tap
3. Pick the city from the list.
4. Enter the street name:
1. Tap
2. Start entering the street name on the keyboard.
3. Get to the list of results:
x
After entering a couple of characters, the names that match the string appear in a
list.
x
Tap
4. Select the street from the list.
5. Enter the house number:
1. Tap
2. Enter the house number on the keyboard. (To enter letters, tap
select an alphabetic keyboard layout. To enter symbols, tap
3. Tap
6. The map appears with the selected point in the middle. Tap
mode) or
automatically calculated, and you can start navigating.
(Simple mode), or
to open the list of results before it appears automatically.
.
to open the list of results before it appears automatically.
.
to finish entering the address.
(Advanced mode) from the Cursor menu. The route is then
, (Advanced mode).
and
).
(Simple
35