Emission Control System - Ariens Zoom XL 48 Owner's/Operator's Manual

DO NOT operate on slopes
over 15°.
4.4 Service Hazard
Before servicing unit do the
following:
Read owners manual
before servicing or making
adjustments to unit.
P
Set parking brake.
Remove key and
disconnect spark plug
before servicing or making
adjustments to unit.
4.5 Bystander Hazard
DO NOT operate the unit in
the presence of
bystanders.
Do not carry passengers.
Look behind when
operating the unit in
reverse.
4.6 Loss of Traction Hazard
5. HOT SURFACES!
6. DANGER!

EMISSION CONTROL SYSTEM

This equipment and/or its engine may include
exhaust and evaporative emissions control
system components required to meet U.S.
Environmental Protection Agency (EPA)
and/or California Air Resources Board
(CARB) regulations. Tampering with emission
controls and components by unauthorized
personnel may result in severe fines or
penalties. Emission controls and components
can only be adjusted by an Ariens Company
EN - 7
If loss of traction is
experienced do the
following:
Disengage PTO.
Look before backing.
Proceed off slope slowly.
Do not try to turn or speed
up.
DO NOT touch parts
which are hot from
operation. ALWAYS allow
parts to cool.
Keep hands and feet
away.