Ariens Zoom XL 48 Owner's/Operator's Manual page 30

PROBLEM
Engine
overheats.
Unit moves with
engine off and
parking brake
engaged.
Hour meter
continues when
engine not
running.
Unit does not
travel in a
straight line.
Unit creeps with
steering levers
in neutral
position.
Poor cutting
quality.
PROBABLE CAUSE
1. Engine oil level
low.
2. Cooling system
plugged.
3. Faulty engine.
1. The parking brake
needs adjustment.
2. Faulty parking
brake.
1. Ignition key is in
the run position
with engine turned
off.
1. Incorrect tire
pressure.
2. Steering levers
need adjustment.
3. Hydrostatic
transmission
and/or linkage
needs adjustment.
1. Hydrostatic
transmission
and/or linkage
needs adjustment.
1. Mower deck not
level or mower
pitch is incorrect.
2. Dull or faulty
mower blades.
1. Add engine oil. Refer to Engine
Manual for detailed instructions.
2. Clean cooling system. Refer to
Engine Manual for detailed
instructions.
3. Contact your Ariens Dealer.
1. Contact your Ariens Dealer.
2. Contact your Ariens Dealer.
1. Turn ignition key to the off position.
1. Check tire pressure (see
Specifications on page 32)
2. Adjust steering levers (see Forward
and Reverse Speed Adjustment on
page 25)
3. Contact your Ariens Dealer.
1. Contact your Ariens Dealer.
1. Level and adjust pitch of mower
deck (see The Distance From The
Mower Blades To The Ground on
page 21).
2. Sharpen mower blades or replace
mower blades (see REPLACING
MOWER BLADE on page 20).
EN - 30
CORRECTION