Table of Contents
Advertisement
24
Regular Timer
Programming
Remember, the clock must be set before you can progamme
the timer (
pg. 42).
Before performing the following steps:
Insert a cassette with the safety tab in place. The recorder
will come on automatically.
Turn on the TV and select the VIDEO channel (or AV mode).
1
4
7
/
2
START+/–
2,3
1
¶
1
1
PROG
3
PDC Recording
Now available from some TV stations, PDC (Programme
Delivery Control) is a service designed to assure safe,
accurate timer recording. With this system, special code
signals are transmitted together with the audio/video
signals. These code signals control your video recorder and
have precedence over advertised times you preset in the
timer. This means that your recorder will start and stop
recording when the preset TV programmes actually start
and end — even if the broadcast time of a preset TV
programme is changed.
NOTES:
Set the start time (PDC time) exactly as advertised in the
TV listing. A different time than advertised will result in
no recording.
PDC Recording is also possible when a satellite receiver
or a cable system is connected to AV2 IN on your
recorder.
PDC recording is also possible via the AV1 IN/OUT
connector.
2
3
5
6
4
8
9
0
4
5
3
¡
7
8
4
¢
TIMER RECORDING(cont.)
If you don't know the PlusCode number for the programme you
wish to record, use the following procedure to set your recorder
to timer-record the programme.
ACCESS TIMER
PROGRAMMING SCREEN
1
Press PROG
ACCESS PROGRAMME
SCREEN
2
Press START +/–. (If you're
just starting out, "P1"
appears.)
The front display panel looks like this:
SP
ENTER PROGRAMME
START TIME
3
Press START +/– to enter
the time you want
recording to start.
Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
The front display panel looks like this:
SP
ENTER PROGRAMME STOP
TIME
4
Press STOP +/– to enter the time you want recording to
stop.
ENTER PROGRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
– P1 –
START
STOP
=
–:– –
–:– –
SP
OFF
DATE
TV PROG
25.12
– –
[+/–] =
[MENU] : EXIT
– P1 –
START
STOP
=
21:00
–:– –
SP
OFF
DATE
TV PROG
25.12
– –
[+/–] =
[MENU] : EXIT
Advertisement
Table of Contents
