Regular Timer Programming - JVC HR-S9400EE Instructions Manual

32
EN
Regula r Timer
Progra mm ing
Remember, the clock must be set before you can
programme the timer (
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
● Set the REC SYSTEM switch to the appropriate position.
( pg. 27)
• •
• • • •
• • • •
• • • •
• • • •
• • • •
START+/ –
PRO G
Downloaded from: https://www.usersmanualguide.com/
pg. 12).
2
1 2 3
4 5 6
7 8 9
0
4
TIM ER RECO RD IN G (cont.)
ACCESS TIMER PRO GRAMMIN G
SCREEN
1
Press PRO G .
ACCESS PRO GRAMME SCREEN
2
Press START +/ – . (If you're
just starting out, " P1"
appears.)
The front display panel looks like this:
EN TER PRO GRAMME ST ART TIME
3
Press START +/ – to enter
8
the time you want
recording to start.
● Press and hold
+/ – to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
The front display panel looks like this:
EN TER PRO GRAMME STO P TIME
4
Press STO P +/ – to enter the time you want recording to
stop.
EN TER PRO GRAMME DATE
5
Press D ATE +/ – . (The current date appears on screen.
The date you enter appears in its place.)
– P1 –
START
–:– –
=
SP
DATE
25. 12
[+/–] =
[MENU] : EXIT
SP
– P1 –
START
21:00
=
START SP
DATE
25. 12
[+/–] =
[MENU] : EXIT
SP
STOP
–:– –
ON
TV PROG
– –
STOP
–:– –
ON
TV PROG
– –