Table of Contents
Advertisement
Playback
Features
1
4
7
/
2
1
¶
1
3
q
¡
2
3
5
6
8
9
0
4
TV PROG
3
¡
7
8
PAUSE
4
¢
PUSH JOG
Take advantage of special functions possible with the recorder's
controls or the remote control.
Still Picture/Frame-By-Frame
Playback
PAUSE DURING PLAYBACK
1
Press PAUSE. If there is vertical jitter, use the TV PROG
buttons to correct the picture.
During still picture, the sound from the previous
3 seconds (approx.) will be played back repeatedly
(provided there was at least 6 seconds of normal
playback prior to engaging the still picture mode).
The "TIME SCAN AUDIO" must be set to "ON", or the
sound will not be heard (
1
ACTIVATE FRAME-BY-FRAME
PLAYBACK
2
Press PAUSE again.
OR
Press PUSH JOG
SCAN + or – on the recorder.
To resume normal playback, press PLAY.
NOTE:
In the still, or frame by frame playback mode, the picture may
be distorted, and there may be a loss of colour.
Slow Motion
ACTIVATE SLOW-MOTION
PLAYBACK
1
Press PUSH JOG
decrease speed in the forward direction. To play in
reverse slow-motion (and in reverse play mode),
continue to press PUSH JOG
selecting all the forward direction slow-motion modes.
OR
During still picture, press and hold PAUSE for 2
seconds, then release. Press and release again to return
to still picture.
OR
During still picture, press and hold PUSH JOG
on the remote control or TIME SCAN + or – on the
recorder. Release to return to still picture.
To resume normal playback, press PLAY.
pg. 17).
or
on the remote control or TIME
or TIME SCAN – during playback to
or TIME SCAN – after
13
or
Advertisement
Table of Contents
