ing off the ignition to reduce the
strain on the onboard electrical
system.
Additional devices with low
power consumption are possibly
not detected by the vehicle
electronics. In these cases,
onboard sockets are already
switched off shortly after the
ignition is switched off.
Cable routing
The cables from the onboard
sockets to the auxiliary devices
must be routed in such a way
that they:
Do not impede the rider
Do not restrict steering angle
and handling characteristics
Cannot be trapped
Luggage
Lashing down luggage
Route luggage belts between
motorcycle and along anti-slip
locks 1.
Route luggage belt 2 as shown
using example of a luggage roll.
Check piece of luggage for se-
cure hold.
Auxiliary headlight
with LED auxiliary headlight
Operating auxiliary driving
light
Start engine.
7
79
z
OA