with center stand
8
Make sure ground is level and
firm and place motorcycle on
108
center stand.
z
Remove screw 1 and take
speed sensor out of hole.
OE
Remove axle nut 2.
Loosen lock nuts 3 on left and
right by turning counterclock-
wise.
Loosen adjusting screws 4 on
left and right by turning clock-
wise.
Remove adjusting plate 5 and
slide axle as far as possible to-
ward inside.
Remove quick-release axle 6
and take out adjusting plate 7.
Roll rear wheel as far forward
as possible and remove
chain 8 from chain sprocket.