BMW F 800 GS Rider's Manual page 117

Remove bulb 2 from
light housing by turning it
counterclockwise.
Replace defective bulb.
Bulbs for flashing turn
indicators, front
R10W / 12 V / 10 W
To prevent contaminants from
being deposited on the new
bulb's glass surface, always use
a clean, dry cloth to hold it.
Install bulb 2 by screwing
clockwise into light housing.
Insert inside end of lens into
light housing and close.
Install screw 1.
Replacing license-plate
bulb
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
8
115
z