BMW F 800 GS Rider's Manual page 63

ABS self-diagnosis is
performed ( 62).
with Automatic Stability Control
OE
(ASC)
ASC self-diagnosis in progress.
( 62)
Engage neutral, or pull back
clutch lever if a gear is en-
gaged.
You cannot start the mo-
torcycle with the side stand
extended and a gear engaged.
The engine will switch itself off if
it is started with the transmission
in neutral and then a gear is en-
gaged before retracting the side
stand.
For cold starts and at low
ambient temperatures: pull the
lever to disengage the clutch
and twist the throttle grip
slightly.
Press starter button 1.
The start attempt is auto-
matically interrupted if bat-
tery voltage is too low. Recharge
the battery before you start the
engine, or use jump leads and a
donor battery to start.
Engine starts.
If the engine fails to start, the
troubleshooting chart in chap-
ter "Technical Data" may pro-
vide assistance. (
Pre-Ride Check
After the ignition is switched on,
the instrument cluster conducts
a test of the pointer instruments
and the warning and indicator
lamps, i.e. the so-called "Pre-
Ride-Check". This test routine
stops if the engine is started be-
fore it is completed.
Phase 1
The pointer of the tachometer
and speedometer move to the
end stop. At the same time, all
warning and indicator lamps are
switched on consecutively.
Phase 2
The universal warning lamp
changes from yellow to red.
Phase 3
130)
The pointer of the tachometer
and speedometer move to their
starting position. At the same
time all of the activated warning
5
61
z