Front Wheel Stand - BMW F 800 GS Rider's Manual

8
110
Insert right-hand adjusting
plate 5.
z
Install axle nut 2 but do not yet
tighten it down.
without center stand
Remove auxiliary stand.
Insert speed sensor in hole and
install screw 1.
Adjusting chain sag (

Front wheel stand

Mounting front wheel
stand
The BMW Motorrad front
wheel stand is not designed
to support the motorcycle with-
out the assistance of an auxiliary
stand. A motorcycle standing on
the front wheel stand and the
rear wheel alone can fall over.
OE
Place the motorcycle on an aux-
iliary stand before lifting the front
wheel with the BMW Motorrad
front-wheel stand.
Place motorcycle on a suitable
auxiliary stand.
with center stand
Make sure ground is level and
firm and place motorcycle on
center stand.
Use basic stand with tool
number (83 30 0 402 241) in
101).
combination with front-wheel
adapter (83 30 0 402 242).
Loosen adjusting screws 1.
OE