BMW F 800 GS Rider's Manual page 108

tion arrows on the tires or on the
8
rim.
Roll front wheel into front sus-
106
pension while guiding brake
disk between brake pads of
left-hand brake caliper.
z
Lift front wheel and insert
axle 4 as far as possible.
Tighten right-hand axle clamp-
ing screws 1 with specified
torque or use suitable tool to
brace for next work step.
Pinch bolt of quick-re-
lease axle
Tightening sequence: 2x
each side, alternately
14 lb/ft (19 Nm)
Install the axis screw 2 with
torque.
Axle screw in front quick-
release axle
22 lb/ft (30 Nm)
Tighten left-hand axle clamping
screws 3 to appropriate torque.
Pinch bolt of quick-re-
lease axle
Tightening sequence: 2x
each side, alternately
14 lb/ft (19 Nm)
If they have been tightened,
loosen right-hand axle clamping
screws 1 again.
Remove front wheel stand.
OE
without center stand
Remove auxiliary stand.