JVC BR-DV6000E Instruction Manual page 55

SET
button
8 button
MENU RESET
DISP
Mini
PROFESSIONAL
SEARCH– SET SEARCH+
MIC
HOLD BLANK CUE UP
PHONES REC LEVEL
BR-DV6000
CH-1/3 CH-2/4
; button 9 button : button
Memo
If the COUNTER switch is
set to CTL or UB while the
Multi Cue-up screen is be-
ing displayed, the display
returns to the normal
screen.
Searching cue-up points
8 button
MENU DISP RESET
Mini
PROFESSIONAL
SEARCH– SET SEARCH+
MIC
BLANK CUE UP
HOLD
PHONES REC LEVEL
BR-DV6000
CH-1/3 CH-2/4
9 button
CUE UP button
Cue-up point
– – – M U L T I C U E U P – – –
C U E I 0 0 : 0 1 : 3 5 : 1 1
C U E 2 0 3 : 4 2 : 5 9 : 2 1
C U E 3 – – : – – : – – : – –
C U E 4 1 1 : 2 1 : 4 8 : 0 7
C U E 5 – – : – – : – – : – –
E X I T
" S E T " : E N T R Y C U E D A T A
" R E S E T " : C L E A R C U E D A T A
" C U E U P " : E X E C U T E C U E U P
Multi Cue-up screen
Changing cue-up points
1
Press the 8 or 9 button to bring the cursor to the cue-up
point to be changed. Press the : button.
¥ The hour digits of the registered time code display blink.
Press the : button to select the digit to be changed.
2
Press the 8 or 9 button again to change the time code.
Press the 8 button to increase the time code data by 1 frame.
Press the 9 button to decrease the time code data by 1 frame.
3
Press the SET button to register the changed time code.
If no time code is to be registered, do not press the SET button.
Instead, press the ; button to make the blinking time code display
disappear.
Exiting the Multi Cue-up screen
Press the 8 or 9 button to bring the cursor to EXIT. Press the SET
button.
¥ The display of the monitor or the LCD returns to the normal screen.
1.
Set the COUNTER switch to TC.
2.
Press the CUE UP button when the normal screen is displayed.
¥ The Multi Cue-up screen appears on the monitor or the LCD.
3.
Press the 8 or 9 button to bring the cursor to the cue-up
point to be searched.
4.
Press the CUE UP button.
¥ The cue-up operation for the selected point is performed.
– – –
– – – M U L T I
C U E I 0 0 : 0 1 : 3 5 : 1 1
C U E 2 0 3 : 4 2 : 5 9 : 2 1
C U E 3 – – : – – : – – : – –
C U E 4 1 1 : 2 1 : 4 8 : 0 7
C U E 5 – – : – – : – – : – –
E X I T
" S E T " : E N T R Y C U E D A T A
" R E S E T " : C L E A R C U E D A T A
" C U E U P " : E X E C U T E C U E U P
During cue-up operation
While searching is being per-
C U E U P – – – – – –
formed, the cue-up point to be
searched flashes on the moni-
tor or the LCD.
● For cue-up operation, use
● If the COUNTER switch is
Memo
tapes with continuous time
codes recorded.
set to CTL or UB while the
Multi Cue-up screen is be-
ing displayed, the COUN-
TER mode does not change.
E-55