Table of Contents
Advertisement
NAMES AND FUNCTIONS
OF PARTS
LINE
Y/C
IN
OUT
MONITOR
OUT
&
SIGNAL
GND
* ^
^
DC power input terminal (2-PIN)
This terminal is for inputting DC 12 V. Connect
the DC power cord of the supplied AC adapter.
Memo
● When power is supplied to this terminal, the
OPERATE indicator located on the front panel
lights up. (The indicator turns red when BR-
DV6000 is in the OPERATE OFF state)
● Whether to set BR-DV6000 to enter the OP-
ERATE ON mode or OPERATE OFF mode
when power is supplied to the terminal can
be selected with DC IN MODE in the SYS-
TEM (2/2) Menu screen.
)
● If the
TIMER switch on the rear panel is
set to "REC" or "PLAY", recording or playback
will be automatically started when power is
supplied to the terminal. (Timer recording/
playback)
&
[SIGNAL GND] terminal
This is the grounding terminal for signals.
*
DC power cord clamp
Use this clamp to fasten the DC power cord.
(
[DV IN/OUT] terminal
This is the input/output terminal for IEEE1394-
compliant digital signals. It is for connecting to
video equipment with a DV terminal.
• To enable signal input via this terminal, set
the INPUT SELECT switch located on the
front panel to "DV".
• Signals that come from this terminal are out-
put regardless of the setting of the INPUT
SELECT switch.
• If REPLICATION of the SYSTEM (2/2) Menu
is set to DV, the REC command is output from
this terminal when BR-DV6000 begins play-
back. (REPLICATION mode)
• Set PB/DV IN in the SYSTEM(2/2) Menu
screen according to the signal format to be
input to this terminal. (NTSC or PAL)
E-18
COMPONENT
VIDEO
R-Y
B-Y
Y
IN
SYNC IN
TIME CODE
IN
OUT
DV
SERIAL
IN/OUT
DC12V
REMOTE
( ⁄ ¤ )
– Rear panel – (continued)
REMOTE2
IN
AUDIO
OUT
CH 1/3
CH 2/4
IN
OUT
OUT
OFF
REC
PLAY
MONITOR
TIMER
OUT
REMOTE1
‹
)
[TIMER] recording/playback
switch
This switch is for setting BR-DV6000 to start
timer recording or timer playback when power
is supplied to the
according to an external timer.
OFF : No timer recording or timer playback.
REC : When power is supplied, BR-DV6000
starts recording automatically.
(Timer recording)
PLAY : When power is supplied, BR-DV6000
starts playback automatically.
(Timer playback)
Memo
● If the TIMER switch is set to "REC" or "PLAY",
BR-DV6000 automatically enters the OPER-
ATE ON mode upon DC power on even when
DC IN MODE in the SYSTEM (2/2) Menu
screen is set to "OPE OFF".
⁄
[SERIAL REMOTE IN] terminal
(mini jack)
This terminal is for connecting to the serial re-
mote controller RM-G30 (sold separately).
To operate BR-DV6000 with this terminal, per-
form the following settings.
• Set REMOTE SEL SER in the REMOTE
(1/2) Menu screen to "ON" or "LOC+REM".
ON
LOC+REM: This terminal is effective regardless
Memo
● To use this terminal as the foot switch input,
set FOOT SW in the REMOTE (2/2) Menu
screen. (
^
DC power input terminal
4
: When the
REMOTE / LOCAL
switch on the front panel is set to
"REMOTE", this terminal becomes
effective.
of the setting of the
LOCAL switch on the front panel.
☞
Page 77)
›
fi
4
REMOTE /
Advertisement
Table of Contents
